BFJPT - 786-104-TT-L-32A,TYPE II RED 1136 LACQUER

  • MSDS: BFJPT
  • Manufacturer: AMERON INDUSTRIAL COATINGS DIV
  • Product Name: 786-104-TT-L-32A,TYPE II RED 1136 LACQUER
  • National Stock Number: 8010-00-634-7320
Product Identification

Product ID:786-104-TT-L-32A,TYPE II RED 1136 LACQUER
MSDS Date:01/01/1987
FSC:8010
NIIN:00-634-7320
MSDS Number: BFJPT

Responsible Party
AMERON INDUSTRIAL COATINGS DIVISION
201 N BERRY ST
BREA, CA 92621-3904
US

Emergency Phone: 714-529-4597

Info Phone: 714-529-4597

Cage: 09869

Contractor
AMERON INDUSTRIAL COATINGS DIVISION
BREA, CA 92621-3904 US

Telephone: 714-529-4597

Cage: 09869

Ingredients

ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYL BENZENE (SARA III)

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: <5.0%

OSHA PEL 100 PPM/125 STEL

ACGIH TLV: 100 PPM/125STEL 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ISOBUTYL ACETATE (SARA III)

CAS: 110-19-0

RTECS: AI4025000

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

OSHA PEL 100 PPM


2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)

CAS: 111-15-9

RTECS: KK8225000

Fraction By Weight: <5.0%

OSHA PEL S,100 PPM

ACGIH TLV: S, 5 PPM; 9192

Hazards

Effects of Overexposure:INH:ANESTHETIC, IRRIT OF RESP TRACT OR ACUTE
CNS DEPRSSSN W/HDACHE,DIZ,UNCON,COMA. SKIN & EYES:IRRIT

First Aid

First Aid:IN CASE OF CONTACT, FLUSH SKIN & EYES W/JPLENTY OF WATER
WHILE REMOVING CONTAMINATED CLOTHING. IF INHALED, REMOVE TO FRESH
AIR. CALL A MD IF SYMPTOMS PERSIST.

Fire Fighting

Flash Point:30F TCC
Lower Limits:0.9
Extinguishing Media:SM FIRES:CO*2,DRY CHEM.LG FIRES:POLYMER FOAM
PREFERRED
Fire Fighting Procedures:USE SEL-CONTANED BREATING APPARATUS
Unusual Fire/Explosion Hazard:CLOSED CONTANERS EXPOSED TO HEAT MAY
EXPLODE DUE TO PRESSURE BUILD-UP

Accidental Release

Spill Release Procedures:REMOVE ALL SURCES OF IGNITION (FLAME, HOT
SURFACES, & ELECTRICAL,STATIC, OR FRICTIONAL SPARKS.AVOID BREATING
VAPORS. VENTILATE AREA.REMOVE W/INERT ABSORBENT & NON-SPARKING
TOOLS

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG QTY
IN BLDG DESIGNED TO STORE NFPA CLASS ONE FLAM LIQ. DO NOT TAKE
INTERNALLY. ADD LABEL WARNING.
Other Precautions:GROUND CONTANERS WHEN POURING.AVOID FREE FALL OF LIQ
IN EXCESS OF FEW IN. DO NOT FLAME CUT,BRAZE OR WELD COATED MATERIAL
W/O APROVED RESPIRATOR OR APPROPRIATE VENTILATION.DOT:FLAM LIQUID.

Exposure Controls

Respiratory Protection:RESTRICT VENT:CHEM-MECH FLTR.CLSD:AIR-LINE TYPE
Ventilation:GEN DILTN/LOCAL EXHST TO KEEP TLV/LEL BELOW LIMIT, REMV
FUME
Protective Gloves:YES
Eye Protection:YES, FOR SPLASH
Other Protective Equipment:AVOID LONG EXPOSURE TO CONTAM CLOTHING
Supplemental Safety and Health
VAPOR DENSITY:>AIR WT PER GAL:7.79 LBS. ALSO CONTAINS : ISOPROPYL
ALCOHOL 1-10%,TLV S,400 PPM.HIGHEST VAPOR PRESURE OF A SINGLE
PRODUCT COMPONENT LISTED IS 31.2.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:175-329F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:78.3

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES, HEAT & HOT SURFACES

Disposal

Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTAINER. DISPOSE IN
ACCORDANCE W/FED., STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.